rei 120 doors CONTACT REI 120 door expert
Our double panel fire door is created to resist fire and at the same time to present itself as a normal interior door.
In the event of a fire, its functionality is to close itself in order to prevent the fire from escaping.
The two panels of the rei 120 fire-rated fire doors are made of hot-dip galvanized sheet steel "Sendzimir" system, press-folded and welded with points; Perimeter stop on 4 sides; Internal reinforcements in hot galvanized steel profile; Insulating package made with treated mineral wool; Internal plates for possible assembly of door closers and large handles.
REI 120 fireproof door frame: Made of hot-dip galvanized steel sheet "Sendzimir" system; Seats for heat-expanding gasket and rebate gasket; Suitable for fixing to the wall by means of brackets or plugs; Detachable cover for resting on finished floor; Crosspiece to be removed for execution without stop (except for doors with environmental characteristics); Black plastic strikers for lock latch and rostrums; Thermo-expanding gaskets mounted on the vertical profiles of the frame and central vertical profile of the two-leaved doors, to be mounted on site for the upper crosspiece of the frame, mounted above and below the REI 120 doors
REI 120 fire doors have 2 three-wing hinges for each panel. A carrier equipped with thrust balls and screws for vertical adjustment of the panel, CE marked according to EN 1935, classified by load capacity up to 160 kg, durability 200,000 cycles, suitable for use on fire doors. One equipped with spring for self-closing of the door.
Fire door rostrums: 2 safety rostrums applied on the hinge side of the door.
The lock of the fire door: reversible with latch and central deadbolt, CE marked in accordance with EN 12209. Insert with patent key, predisposition for European type cylinder;
Handle: for fire doors, fire doors, in black plastic and steel core. Steel underplate with cylinder hole. Black plastic cover plate. Fixing screws and insert for patent type key;
Large handle for panic doors: consisting of a horizontal bar in anodized aluminum that engages in the lever arms fixed to the control mechanisms for operating the lock;
Particular fire door plate pòate for fire doors. Price: Metal plate with door identification data, in accordance with current legislation.
Finish: The painting of the fire doors is standard with epoxy-polyester powders thermoset in the oven at 180 °, surface with embossed anti-scratch structure
They have the same characteristics as the brickwork version door but have an embracing frame for plasterboard up to cm. 13, which makes them much more expensive.
Be the first to ask a question about this product!