How to measure for a 2-panel pull-along partition
This guide is for the 2-panel pull-along glass partition: two glass panels that slide together on a track at the top. It is made to measure for your opening: measure the width and height, then choose the closest size on the product page. The price stays the same.
- L Opening width
- H Opening height
- ↑ Solid ceiling or beam
Made to measure, same price
You do not need to calculate anything: our technical office takes care of it.
Enter your opening, we tell you what to choose
Enter the measurements of the opening in the wall, in centimetres.
Your opening is outside the sizes on the product page: message us on WhatsApp and we will make it to measure.
After your order our technical office will contact you to confirm measurements and opening direction, before production.
| Opening width | 150 (75+75) · 160 (80+80) · 180 (90+90) · 200 (100+100) · 220 (110+110) · 240 (120+120) |
|---|---|
| Opening height | 215 · 220 · 225 · 230 · 235 · 240 · 245 · 250 · 255 · 260 · 265 · 270 |
Opening 172 × 243? Choose 180 and 245.
180 (90+90) is the width closest to 172: two panels of about 90. 245 is the height closest to 243. You pay the price of that size and the partition is made to your opening.
First the track, then the panels
The track must be fixed to a steel or concrete beam that is strong enough and level. At the bottom there is a floor guide fixed to the floor with a wall plug. We recommend installation by qualified staff.
Three common mistakes
- Fixing the track to a weak supportIt needs a steel or concrete beam, level.
- Measuring in one place onlyMeasure the width at the top, middle and bottom, and the height on the left and right: keep the smallest.
- Measuring before the floor is laidHeight is taken from the finished floor.
Our 2-panel pull-along partitions
Send us a photo of the opening
Send us the opening measurements on WhatsApp: we will tell you which 2-panel partition to choose.
