12V-1A Power Supply

DIN Power Supply for Home Automation Systems

Make your hotel or building smart with our DIN power supply, perfect for powering all home automation devices. Thanks to its compatibility with GuestKey keypads, Aladino devices, and RFID readers, you can easily implement code-based access, RFID card access, or even innovative remote access technology via smartphone.

Our power supply is ideal for Smart Home, Hotel Automation, and Building Automation projects, and on our shop, you'll find everything you need for the complete installation of home automation systems.

The power supply complies with the European standard EN61000-3-2 on harmonic currents and features a plastic enclosure to protect the user from electrical hazards.

Technical Specifications

• Type: DIN Power Supply HDR-15-12 Series
• Dimensions: Ultra-slim, 17.5 mm width, TS35 standard DIN rail mount
• Input: 100–240 VAC, 50–60 Hz, 0.5 A
• Output: 12 V DC, 1.25 A, maximum power 15 W
• Operating temperature: -30° C → +70° C
• Indication: Operating LED
  

Installation

1. Ensure minimum ventilation: 5 mm on the sides, 40 mm above, and 20 mm below.
2. Position the unit vertically with the input terminals at the bottom. Do not mount upside down or horizontally.
3. Use copper wires according to AWG 18, 16, or 14 specifications. The current carried must be derated to 80% if multiple wires are connected.
4. Use cables resistant to 80°C.
5. Recommended stripping length: 6 mm.
6. Recommended screwdriver: 3 mm flat-head.
7. Recommended torque for terminals: 5 kgf-cm (4.4 lb-in).
8. Recommended fuse and circuit breaker: T2A/L250V on C16/D16.

Mounting on TS35/7.5 or TS35/15 DIN rail: Tilt the unit slightly backward, hook it onto the rail, and slide it until it locks ("Click").

Safety Warnings

• Use only in a controlled environment.
• All operations must be performed by qualified personnel.
• Avoid contact with operating parts or immediately after shutdown.
• Do not install in humid locations or near water sources.
• Do not exceed rated voltage, current, or power.
• Always disconnect power before any intervention.

On our website, you will find the complete manual and all the necessary products to install advanced systems in smart hotels and buildings.