Glass Door Handle with Lock, Key and Thumbturn

Glass door handle with lock

Handle and lock in one piece, fitted directly onto the glass: no frames, boxes or mortise locks needed. From the outside you lock and unlock with the key, from the inside with the thumbturn on the lever, without a key.

Available from stock.

How it works

• Outside: lever with cylinder. Use the key to lock and unlock the door.
• Inside: lever with thumbturn. Turn it and the door stays locked, even without a key: handy for bathrooms, studies and meeting rooms.
• Latch: with the lever pressed down the door opens; when released, the latch engages the strike plate and the door stays closed.

Where to use it

Hinged glass doors, doors in glass partition walls, bathrooms and offices with a glass door. It is not suitable for sliding doors: they need a dedicated lock.

Dimensions

• Glass thickness: 8 mm.
• Plates: inner side 102 × 75 mm, outer side 118 × 75 mm, rosette Ø 62 mm.
• Levers: 123 and 137 mm; overall width 180 mm.
• Finish: satin silver.

Glass drilling

The glass needs a slot made of two Ø 60 mm holes with a 22 mm centre distance: 82 mm long in total. The centre of the inner hole is 80 mm from the edge of the glass. The dimensioned diagram is in the photos: give it to your glazier, who drills the glass before toughening.

What is in the box

• Handle with lock, inner and outer plate
• Strike plate
• 2 rubber gaskets
• Fixing screws and Allen key
• 3 keys

Installation

1. Have the glass drilled following the diagram.
2. Fit the two plates, one on each side, with the rubber gaskets, and tighten the screws.
3. Turn the inner cover 15° to the right, line up the slot, push it all the way in and turn it back 15°.
4. Tighten the Allen screw until it is flush with the cover: once fitted, it faces downwards.

All you need is a screwdriver and the Allen key supplied.

Frequently asked questions

Can it be fitted to a glass door that is already installed?
Only if the glass already has a slot of the right size. Toughened glass cannot be drilled after toughening: in that case a new glass panel is needed.

Does it work on sliding doors?
No, it is designed for hinged doors, where the latch engages the strike plate.

Is it suitable for a bathroom?
Yes: from the inside you lock with the thumbturn, without a key.

What glass thickness is it for?
For 8 mm glass.

How many keys are included?
Three, in the box.

See also our Hinged Glass Doors.