3D Vertical Engraved Pocket Sliding Door

A pocket door frees up space. This one furnishes it.

Most pocket doors choose to be invisible even when closed — smooth, neutral, designed to disappear into the wall twice over. The 3D Vertical does something different: it disappears when open, and when closed it becomes the element you look at. The three-dimensional engraving, with its raised grid pattern, transforms the door's surface into a design detail — the same craftsmanship as the New York Line, here brought into a sliding system.

Who benefits from the pocket version

If space is the priority — a narrow corridor, a walk-in wardrobe, a separation between living and sleeping areas in an open plan — the pocket door is the right technical choice: the leaf slides into the counter-wall and does not occupy the opening arc that a hinged door would require. Here we merely add that you don't need to choose between functionality and character: you can have both.

How it works

The leaf slides on an upper track that completely encloses it within the adjacent wall, with no floor thresholds. The subframe is compatible with major commercial solutions — Eclisse, Scrigno, Dierre — and can be installed on both traditional masonry and plasterboard, even independently.

Technical specifications

• 3D Vertical engraving with water-based lacquer, ecological and with an impeccable finish
• Honeycomb structure in 100% recycled paper, hot-pressed onto 8 mm MDF sheets
• Door leaf thickness compliant with standards for pocket systems
• Frame and architraves in water-repellent HDF, resistant to humidity and wear over time
• Customizable handle and hardware in coordinated black finish
• Clear opening available from 60 to 100 cm
• Compatible with Eclisse, Scrigno, Dierre, and equivalent subframes

Customization

The lacquer color and engraved design variant are chosen based on the project, not the other way around.

Produced in our Capo d'Orlando factory and sold directly online without intermediaries. Factory prices, free shipping throughout Italy.

 How to measure sliding door?

To properly measure your sliding doors, follow these steps. The measurements you need include the width, height, and wall type.

Steps:

1. Measure the Width:
1. Measure the width of the wall opening (wall hole) from one side to the other.
2. Measure the Height:
1. Measure the height of the wall opening from the floor to the top.
3. Measure the Wall Thickness:
1. Measure the thickness of the wall on both sides of the opening.

Measurement Conversion Table (cm):

Wall Thickness

Wall Type:

• Plasterboard: Finished wall thickness 100 cm with internal seat 62 cm
• Masonry: Finished wall thickness 105 cm with internal seat 69 cm

Practical Example:

• Chest: 60 x 210
• Wall Hole: 64.5 x 214.5 cm
• Door: 60 x 210 cm

Taking the correct measurements for interior doors is essential for a perfect installation. Follow these simple steps and use our conversion table to ensure your new interior doors fit perfectly in your space.

Choose our interior doors for a combination of quality, durability and ease of installation. Contact us for more information or a personalized quote!

How to install the Pocket Sliding Door?