How to measure for a glass door with wall-mounted hinges
The glass door is fixed to the wall by its own hinges, with no frame. All you need is a tape measure and three measurements of the opening: the glass to choose is 2 cm narrower and 2 cm shorter.
- A Opening width
- B Opening height
- C Wall thickness
- ↻ Opening direction
The three measurements, one at a time
Write them down in centimetres, to the nearest half centimetre, without rounding.
AOpening width
Measure across the opening, from wall to wall, at three points: top, middle and bottom.
Keep the smallest measurement.
BOpening height
Measure from the finished floor to the top edge of the opening, on the left and on the right.
Keep the smallest. Floor not laid yet? Let us know.
CWall thickness
Measure the wall from one face to the other, plaster included.
Send it to us together with the opening measurements.
What size is your opening?
Tap your opening size (A × B) and we'll tell you which glass to choose on the door's product page.
- Your opening
- 72 × 212 cm
- Glass
- 70 × 210 cm
- Difference
- 2 cm in width, 2 cm in height
- Your opening
- 82 × 212 cm
- Glass
- 80 × 210 cm
- Difference
- 2 cm in width, 2 cm in height
- Your opening
- 92 × 212 cm
- Glass
- 90 × 210 cm
- Difference
- 2 cm in width, 2 cm in height
- Your opening
- 102 × 212 cm
- Glass
- 100 × 210 cm
- Difference
- 2 cm in width, 2 cm in height
The glass is always 2 cm narrower and 2 cm shorter than the opening: with a 77 × 222 opening the glass is 75 × 220. If that size is on the product page, choose it; otherwise choose “Out of Measure” and we'll contact you after purchase to confirm it.
| Opening (A × B) | Glass to choose on the product page |
|---|---|
| 72 × 212 | 70 × 210 |
| 82 × 212 | 80 × 210 |
| 92 × 212 | 90 × 210 |
| 102 × 212 | 100 × 210 |
Depending on the model, the product page also offers a 60 cm width and 200 and 220 cm heights: the same rule applies (opening 62, 202 or 222 cm).
An 82 × 212 opening? Choose 80 × 210 glass.
A finished, square opening
Finished before you measure
The hinges are fixed straight to the wall with wall plugs: the opening must already be plastered, with straight, square sides, and the floor laid.
Wall thickness
Tell us the finished wall thickness together with the opening measurements.
Message us on WhatsAppHow it's installed
Fixing the hinges and adjusting the door, step by step.
See the installation guidePush left or push right?
The opening direction is read looking at the door from the side you push it from: hinges on the left is push left (L), hinges on the right is push right (R).
Push left
hinges on the left
Push right
hinges on the right
Not sure? Send us a photo of the opening on WhatsApp and tell us which room you'll push the door from: we'll tell you which to choose. Message us
Four mistakes to avoid
- Measuring the old doorWhat counts is the opening in the wall, not the door you have now. If an old frame is still fitted, send us a photo with the measurements and we'll help you.
- Measuring before the floor is laidHeight is taken from the finished floor. If the floor goes in later, the opening changes.
- Choosing glass as big as the openingChoose glass 2 cm narrower and 2 cm shorter than the opening. Glass as big as the opening won't fit.
- Forgetting the opening directionDecide beforehand which room you'll push the door from and which side you want the hinges on.
Glass doors with wall-mounted hinges
Send us a photo of the opening with the tape measure
Send us your three measurements on WhatsApp and, if you can, a photo of the opening with the tape measure against it. We'll tell you which glass to choose.


