3D Vertical Panelled Pocket Sliding Door
3D Vertical Panelled Pocket Sliding Door - Masonry / 60 x 210 cm / White Lacquered ...is backordered and will ship as soon as it is back in stock.
Handle:
Select your handle
If you are entitled to the Italian government tax incentives currently in force, you can pay by bonifico parlante (dedicated bank transfer) to claim the deductions (Italy only)
Shipping details
Shipping details
Free shipping in Italy with a specialist courier.
Description
Description
3D Vertical Pantograph-Engraved Pocket Sliding Door
A pocket door frees up space. This one furnishes it.
Most pocket doors choose to be invisible even when closed — smooth, neutral, designed to disappear into the wall twice over. The 3D Vertical does something different: it disappears when open, and when closed it becomes the feature you look at. The three-dimensional pantograph engraving, with its raised grid pattern, turns the door surface into a design detail — the same workmanship as the New York Line, here brought into a sliding system.
Who the pocket version suits
If space is the priority — a narrow corridor, a walk-in wardrobe, a division between the living and sleeping areas of an open-plan space — the pocket door is the right technical choice: the leaf slides into the wall cavity and does not take up the swing area that a hinged door would need. We would only add that you do not have to choose between function and character: you can have both.
How it works
The leaf runs on an overhead track that takes it completely inside the adjoining wall, with no floor threshold. The pocket frame is compatible with the main systems on the market — Eclisse, Scrigno, Dierre — and can be installed in both traditional masonry and plasterboard, including as a DIY job.
Technical features
- 3D Vertical pantograph engraving with water-based lacquer, eco-friendly and with a flawless finish
- Honeycomb core in 100% recycled paper, hot-pressed between 8 mm MDF sheets
- Leaf thickness compliant with standards for pocket systems
- Frame and architraves in water-repellent HDF, resistant to moisture and wear over time
- Handle and hardware can be customised in a coordinated black finish
- Clear opening available from 60 to 100 cm
- Compatible with Eclisse, Scrigno, Dierre and equivalent pocket frames
Customisation
The lacquer colour and the variant of the engraved design are chosen to suit the project, not the other way round.
Made in our factory in Capo d'Orlando and sold directly online with no intermediaries. Factory prices, free shipping throughout Italy (minor islands excluded).
This model is part of the Pocket Sliding Doors collection.
How to take measurements
How to take measurements
You need the measurements of the opening in the wall and your wall type.
A × D is your opening; B × C is the pocket frame, shown in the table.
| Your opening (A × D) | Choose on this page | Pocket frame (B × C) |
|---|---|---|
| 64.5 × 214.5 | 60 × 210 | 61.5 × 220 |
| 74.5 × 214.5 | 70 × 210 | 71.5 × 220 |
| 84.5 × 214.5 | 80 × 210 | 81.5 × 220 |
| 94.5 × 214.5 | 90 × 210 | 91.5 × 220 |
Is your opening a different size? Choose “Out of Size”: we make it to measure and contact you after purchase.
Installation
Installation
PDF installation instructions are on the Technical support page. If you can't find the ones for your product, message us.
Can't find your measurements?
Can't find your measurements?
Payment methods






