Warning: Last items in stock!
A trend binary at an affordable price.
Divina Amortized sliding door system completely made of anodized aluminum. For sliding glass mm. 8/10.
Binary in extruded anodized aluminum and length from cm. 200. Capacity Kg. 80.
N. 2 Blue Motion sliding calipers in steel with Teflon-coated ball bearings.
N. 2 Air-cushioned limit switch stop
N. 1 Lower anti-flag glass guide , (for 8 - 10 mm thick glass).
new sliding system SLIDING DIVINA BLUE MOTION
with Binary from ml. 2,00 price 160,00.
with Binary from ml. 3,00 price 175,00.
with Binary from ml. 4,00 price 200,00.
with Binary from ml. 6,00 price 250,00.
|WHAT WE PROVIDE|
Binary in extruded aluminum of great thickness and length from cm. 200. Capacity Kg. 80.
N. 2 Blue Motion sliding pliers in steel with Teflon-coated ball bearings.
N.2 Cushioned and invisible limit switches .
Section of the track with relative heights.
N. 1 Glass Guide lower anti-flag, (for 8 - 10 mm thick glass).
drilling and assembly sheet
|ACCESSORIES ON REQUEST|
|Double Satin stainless steel handle - diameter mm. 25 length mm. 400, for both sides. |
Double Brushed stainless steel handle - diameter 25 mm, length 700 mm, for both sides.
Round handle mm. 58 (50 mm hole), for both sides.
Square stainless steel handle, for both sides.
Stainless steel square profile handle 20 x 20 x 230, for both sides.
|The binary and accessories are packed in a cardboard box.|
Immediate delivery with Bartolini courier.
Delivery €. 20,00.
|Fit the aluminum guide and position it under the pulleys of the glass door. Under the door position of the spacers from mm. 10.|
Mark the position of the aluminum rail on the wall with a pencil. Unhook the glass door and mark the position of the drilling.
After marking for drilling.
Drill with a percussion drill with a mm. 8 for mm. 40.
After inserting all the dowels. Place the aluminum guide and screw all the screws into their respective plugs.
Fit the second aluminum guide.
enough to make it unique.
Hook the glass door onto the aluminum guide. Tighten the Allen screw on the wheel with a hex wrench.
detail of the lower guide, to be fixed to the floor with plugs.
and here ... that's it !! Does it seem difficult to you?
Be the first to ask a question about this product!